Menu

Typical representation of Imada DI-1M Series Impact Digital Torque Tester (Standard Duty) Click for larger image.
Product picture of DI-1M Series Imada Impact Digital Torque Tester (Standard Duty) for illustration purposes only. Actual product may vary.
hello
hello
hello
hello

Impact Digital Torque Tester (Standard Duty)

Part number: DI-1M Series | Request a quote
DI-1M torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds.

Accredited calibration/NIST traceable calibration certificate for Imada DI-1M Series Impact Digital Torque Tester (Standard Duty) might be available on request (for an extra charge). Please contact us for more info.

Imada Impact Digital Torque Tester (Standard Duty): instrument description

The Imada DI-1M Digital Torque Tester is perfectly suited for on-the-spot calibration of impact drivers and air tools. Calibrate your own air tools and impact wrenches and save down time. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. Virtual RS-232 serial output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiCad battery or the included AC adapter.

Operation Modes

Peak, Real Time and Peak Down modes are selectable. Peak mode captures the peak torque achieved during a test. PEAK reading will not change until a higher value is measured. Real Time mode displays the real time transient torque value. Peak down captures the critical first peak value and will not change even if a higher value is subsequently measured.

The DI-1M also provides peak data for SPC (statistical process control) via the USB Virtual COM port. Click on the link below for torque tester data acquisition software.

What’s Included
Choose from four different remote sensors for the DI-1M, available in ranges up to 362 lbf-ft with 3/8″, 1/2″ or 3/4″ drives. All testers include a 3 Point Certificate traceable to NIST, ISO-17025 Certificates are available at an extra charge. The kit includes the remote sensor, display unit, cable and AC
adapter/charger.

IMADA Digital Torque Tester fot Impact Tools (DI-1M Series) Features:

  • Digital torque tester for Air & Impact tools measures up to 362 lbf-ft;
  • Ergonomic light weight, torque tester with heavy duty metal construction
  • Easy to read LED panel displays reference torque value in lbf-ft, kgf-m and N-m (selectable);
    and number of blows for selected period (0.1 - 9.9 sec)
  • Peak, Real Time and Peak Down measuring modes (selectable)
  • Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
  • Both clockwise and counterclockwise operation
  • USB Virtual COM port (peak data only)
  • Runs on internal NiCad batteries (8 hour use)
  • AC charger included

SJ Spring Adapter Specifications:

Model Capacity Drive Screw for Model
SJ-200 200 lbf-in 3/8" 3/8-16 DI-1M-50
SJ-300 300 lbf-in 3/8" 1/2-13 DI-1M-50
SJ-500 500 lbf-in 1/2" 1/2-13 DI-1M-200
SJ-1000 1000 lbf-in 1/2" 3/4-10 DI-1M-200
SJ-2000 2000 lbf-in 3/4" 3/4-10 DI-1M-500

Ordering info:

Imada Digital Torque Tester Ranges Accuracy ± 0.5% F.S., ±1 LSD. Data acquisition software and Mounting bracket for DI-1M are available on request.

Model Description Capacity (Resolution)
 
    lbf-in kgf-cm N-cm  
DI-1M-50 Standard Duty, Impact Torque Testers w/ Remote Sensor 3.0~440.0 3.0~500.0 30~5000 (N-cm)  
DI-1M-200A Standard Duty, Impact Torque Testers w/ Remote Sensor 30~1740 30~2000 3.0~200.0  
    lbf-ft kgf-cm N-cm  
DI-1M-200 Standard Duty, Impact Torque Testers w/ Remote Sensor 3.0~145.0 0.30~20.00 3.0~200.0  
DI-1M-500 Standard Duty, Impact Torque Testers w/ Remote Sensor 3.0~362.0 0.30~50.00 3.0~500.0  

Ordering info

As a canadian distributor of Imada Force and Torque Measuring Instruments products we stock most of these Impact Wrench Torque Testers for same day shipping. To enquire on the Imada DI-1M Series Impact Digital Torque Tester (Standard Duty) availability and current list price please contact us.

Please log in to write a review.