Typical representation of Imada I-Series Non Impact Torque Testers (up to 174 lbf-in) Click for larger image.
Product picture of I-Series Imada Non Impact Torque Testers (up to 174 lbf-in) for illustration purposes only. Actual product may vary.

Non Impact Torque Testers (up to 174 lbf-in)

Part number: I-Series | Request a quote
Imada’s digital torque tester is ideal for calibrating power screwdrivers with a torque control clutch. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value.

Accredited calibration/NIST traceable calibration certificate for Imada I-Series Non Impact Torque Testers (up to 174 lbf-in) might be available on request (for an extra charge). Please contact us for more info.

Imada Non Impact Torque Testers (up to 174 lbf-in): instrument description

The IMADA Series i electric power driver calibrator measures the peak torque non-impact electric/air drivers apply to a screw. Under tightened bolts and screws do not generate sufficient clamp force and can lead to loosening and assembly failure. Over tightening, past the yield point, permanently deforms the screw joint and can also lead to failure which is why proper tightening torque is so important. Manual torque wrenches can also be calibrated.

Unique Smart Adapters
The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software.

The Series i torque calibrators are compatible with Imada’s SW-1SV-USB software.

The peak torque or peak down torque in breakaway tests is captured automatically. The Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m.

What’s Included

All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.

Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).

IMADA Series i Standard Features

  • Wide measuring range up to 174 lbf-in
  • Selectable units lbf-in, Kgf-cm, N-cm and N-m
  • Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
  • 2 – driver adapters included: i-8 & i-80 come with smart adapters, CD-150 & DI-11 come with spring adapters
  • Peak, Real Time and Peak Down measuring modes (selectable)
  • Measure both clockwise and counterclockwise
  • USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
  • Statistics: number of data, Max, Min, Avg
  • Heavy-duty metal construction
  • Runs on internal NiCad batteries or AC adapter
  • 3/8″ drive for socket wrenches

IMADA Series i electric power driver calibrator: Ranges

Model Accuracy Capacity
  % lbf-in kgf-cm N-cm N-m
Imada i-8 ±0.5% F.S. ±1 LSD 0.020~6.970 0.020~8.000 0.20~78.60 -
Imada i-80 ±0.5% F.S. ±1 LSD 0.20~69.70 0.20~80.00 2.0~786.0 0.020~7.860
Imada CD-150M ±0.5% F.S. ±1 LSD 1.0~130.0 1.0~150.0 1.0~1500 0.10~15.00
Imada DI-11 ±0.5% F.S. ±1 LSD 1.0~174.0 (0.1) 1.0~200.0 (0.1) - 0.10~20.00 (.01)

Driver adapters: specifications
- 2 included

  Adapter Model Range lbf-in Top Screw Operational life
Imada i-8 Smart OW-025E
10,000 hrs
8,000 hrs
Imada i-80 Smart OW-20E
5,000 hrs
5,000 hrs
Imada CD-150M Spring SJ-50
2,500 uses
2,500 uses
Imada DI-11 Spring SJ-50
2,500 uses
2,500 uses

Ordering info

As a canadian distributor of Imada Force and Torque Measuring Instruments products we stock most of these Non-Impact Torque Tester & Gauges for same day shipping. To enquire on the Imada I-Series Non Impact Torque Testers (up to 174 lbf-in) availability and current list price please contact us.

Please log in to write a review.